ARMATTAN ROOSTER - 5 inch - FRAME
ARMATTAN ROOSTER - 5 inch - FRAME
ARMATTAN ROOSTER - 5 inch - FRAME
ARMATTAN ROOSTER - 5 inch - FRAME
ARMATTAN ROOSTER - 5 inch - FRAME
BOOM FPV

ARMATTAN ROOSTER - 5 inch - FRAME

Regular price $95.00

The Armattan Rooster is HERE!!! Make BOOM FPV your number one source for all things Armattan!

Armattan Rooster
We don't cluck around

When the Armattan Chameleon was released a year ago, it took the multirotor community by storm.  And while the minds behind it were relieved that the design was successful, they didn't stop there.  Comments and suggestions came in, and the team kept looking for any way they could improve upon the formula.  It took months of development and testing, but it's paid off.  As 2018 comes upon us, something new is coming.  Something awesome.

Special thanks to Jason Hay - Designer

Ti-metal treat

The Armattan Rooster is a compressed-x, freestyle frame.  At first glance it may seem similar to the Chameleon, but if you look carefully, almost nothing beyond the shape is the same.

First and foremost, the Rooster uses new materials.  Armattan developed a new carbon fiber weave in conjunction with this frame.  It still has some spring, but is much less likely to delaminate in a high impact.  While this carbon will eventually be used in all of Armattan's frames, the Rooster will be the first to sport this upgrade.  Another change is that the camera cage is now grade 5 titanium.  By moving to a slightly more expensive material, Armattan has doubled the strength of the camera cage at the same mass as the Chameleon's.  The rear standoffs on the Rooster are also newly developed for this airframe.  They extend out past the rear of the top and bottom carbon to protect from a direct rear impact.  In addition, the bolt holes in the middle provides for modular antenna mounting plates: now available to serve and protect a wider variety of VTX's.  Lastly, the Rooster uses stainless steel, flathead bolts.  Besides the low profile making bolts less likely to damage LiPos or cameras, this hardware is terribly strong.  You will find that you'll strip your driver long before you damage your hardware, and the weight gain over using aluminum is minimal.

If you take a closer look at the cage, you'll notice a few more important features.  As is expected from Armattan, there is a lot of FPV camera protection.  You can fly safely with your cam anywhere from 25 to 60 degrees.  In addition, the center-point of the camera has been lowered in comparison to the Chameleon.  Now your rolls will show less vertical distortion as you bang the sticks.  Besides a lower placement, the camera mount supports the Runcam Swift v2, the Foxeer Arrow v3, or any other standard-mount FPV camera with a 28.5mm case.  The metal of the cage was also stretched from 4x4mm to 6x2mm to allow for the use of M3 hardware.  This is something that certainly would not have been possible without the incorporation of titanium. And lastly, in order to increase strength and reduce weight, the HD camera has been fixed at 35 degrees - a value seems to situate many pilots without modification.  In fact, the weight reduced here makes a difference.  The Rooster comes in just under what the Chameleon weighs.

 

Rooster Specs

Frame Weight

approx 125 grams

Motor to Motor

230mm

Frame Shape

Compressed-X

Main Plate Thickness

4mm

Arm Thickness

4mm

 Hardware

Stainless Steel bolts
Titanium Cage
Aluminum standoffs                 

Motor Mount Pattern

22xx

                          Center Stack Mount Pattern

30.5mm

FPV Camera Mount

28.5mm (Swift v2, Arrow v3, etc)

Max Center Stack Height

22mm

Warrantied Parts

All

Recommended Components

Motor Sizes

2306/2450kv

ESCs

30a

Prop Size

5" or 6" arm options available

LiPo

4-5S/1300mah

Customer Reviews

Based on 1 review Write a review

More from this collection